Shelf edge station begins

Ocean research cruise blog of Jonathan Sharples

 

Work at the shelf edge has started well. One big difference between the work here and the work that we did at the first station on the cruise is that we have no moored instruments here. The shelf edge is the most heavily fished part of the seas around NW Europe, so long-term deployments of moored instruments tend to be unsuccessful as the chance of moorings being snagged by fishing gear is very high. For the duration of our work at this site we instead hang a chain of instruments from the ship. Jo Hopkins and Chris Balfour, from the National Oceanography Centre in Liverpool, spent the previous day setting up about 40 temperature, salt and chlorophyll loggers so that their clocks were all synchronised and they all take measurements at the same rate (once per minute). The instruments were then clamped every 2.5 metres on a 200 metre wire lowered over the stern, with a 300 kg ball of lead on the end of the wire keeping it vertical in the water.

Jo with chain instruments

We are using this chain of instruments to track a particular feature of the shelf edge. As the tide moves onto and off the shelf, the steep slope in the seabed causes the tide to push the thermocline up (tide flowing onto the shelf) and down (tide flowing off the shelf). This up and down motion generates waves on the thermocline that move away from the shelf edge, both onto the shelf and away into the deep ocean. These underwater waves can be very large, 100 metres from peak to trough and 15 km long. They are important because they result in a lot of mixing at the shelf edge, bringing nutrients from the deeper water up towards the surface. Our chain of instruments will track this up and down motion of the thermocline wave, so we have a picture of how rapidly the physics of the water below us is changing as we collect all of the biological and chemical samples
Original post 

t-chain deployment

Dolphins everywhere

Ocean research cruise blog of Jonathan Sharples

 

We had an astonishing display of dolphins last night. While sat carrying out a couple of measurements with the CTD for the iron work, lots of small fish had been attracted to the ship probably because of the deck lights. They in turn attracted something like 40-50 dolphins, cruising up and down the ship, accelerating to chase fish, and leaping out of the water to catch fish that were trying to escape. The acceleration and the rate at which the dolphins could turn through 180 degrees were incredible to watch. [A good question for the Oceans Sciences and Marine Biology students back at Liverpool University – the dolphins were reaching easily 10 metres per second, what Reynolds number were they operating at?] With the light from the ship we could see the dolphins 2 or 3 metres below the surface, streaking along after their food. Two sharks also turned up for the feast – much more sedate than the dolphins, cruising slowly into the foray and just wandering about as the dolphins flashed around them. We got a good look at one of them as it passed right below us at the side of the ship – at least 2 metres long. Dolphins and sharks paid each other no attention at all. This whole theatre lasted a good 90 minutes. My camera wasn’t quite up to the task of night-time photography, but the best effort is below.

dolphin watching

A glorious morning for us today. The wave height has dropped below 3 metres for the first time this trip. We have now started our 3 day stint at the station at the shelf edge.
Original post 

dophins at night

End of the iron line

We have nearly finished our transect sampling iron from the deep ocean back to the shelf. The iron group is fairly excited, because in all of the profiles we have done gradually working along and up a seabed canyon there has been evidence in the CTD data of lots of suspended particles near the seabed. There must be some flow of water down there that is pulling sediments, along with trace metals such as iron, up off the seabed which is exactly what the scientists are looking for.

iron nerve centre

Other lab work continues also, as the iron chemists need to know what else is happening in the water to help understand what they are seeing. Chata, a PhD student from the University of East Anglia, has spent the past 3 days trying to fix a machine she uses to measure argon, oxygen and nitrogen gas dissolved in seawater. The machine is refusing to work properly, so she is having to store samples for analysis later back at University. Oxygen and argon behaviour similarly in seawater, and in the rates they can be transferred from the atmosphere to the ocean. However, oxygen also has a biological component to how it changes – if the ocean’s microbial plants are growing, then (like all plants) they produce oxygen. Chata can compare what she sees the argon and the oxygen doing in the water, and any differences between them will tell her about how the biology in the ocean is working. She is also helping us by doing chemical analyses of water samples to measure the oxygen concentration, which will allow us to calibrate the oxygen sensor that we have on our CTD.

chata titrating oxygen samples

Due to finish this transect at about 0100 tomorrow. We then plan to start th second of our main study stations, this time sat at the edge of the continental shelf.

Original post

Sampling iron

Ocean research cruise blog of Jonathan Sharples

 

Starting in a depth of 2,500 metres we now plan to sample the concentration of iron in the sea at several stations, gradually working back towards the continental shelf. It might seem like an odd thing to look for, but iron is a vital nutrient to the microbial plants in the ocean. The plants only need it in minute concentrations, but in some parts of the ocean there is so little iron that the plant growth is inhibited. This was a big mystery in oceanography for a long time – there were areas where there was plenty of sunlight and plenty of the main nutrients (nitrogen and phosphorus, the sort of things you might give to plants in your garden), but very little growth of the ocean’s plants. Demonstrating that lack of iron was the problem took a long time because it is so difficult to measure iron without contaminating samples (for instance, with iron from the research ship). The CTD used to collect the seawater for iron analysis is entirely made of titanium and plastic, and the bottles on the CTD frame are always stored in clean conditions rather than being left on the frame as we do with the steel CTD. All of the iron analyses are done in a special clean chemistry lab on the ship, with the scientists having to wear very clean lab coast and gloves, and particularly attractive hats. Nobody is allowed into this lab without the right gear.

Iron is not a problem for the microbial plants that grow in the shallow shelf seas. The reason we are sampling iron is that the continental shelves are thought to be sources of iron for the adjacent open ocean, possibly resuspended in sediments from the seabed of the shelf and the deeper waters of the shelf slope where we are now.
Original post

Into the deep water

We’re in deep water now. Not the deepest in the ocean, but enough to make a normally shelf-focused oceanographer a little nervous. The forecast suggests things should quieten a little over the next day or two, so we headed out over the shelf edge and into the deep ocean aiming for a depth of 2,500 metres. Crossing the shelf edge always looks like we are going over a cliff when you look at the echosounder. On the shelf the depth had increased from 150 to 200 metres in about 100 km, but then over the shelf edge the depth suddenly increases from 200 to 2000 metres in about 30 km. So a change of 1800 metres over 30 km: if you cycled a slope like that you might get a bit out of breath, but it’s not the cliff edge that the echosounder makes it look.

cup creations

 Scientists can be easily amused. The one thing we really like to do when we work in deep water is decorate polystyrene cups and then send them down with the CTD. Amber Annett from Edinburgh University remembered to bring a supply of cups, pens, and a pair of old tights to hold the cups on the CTD frame. The lab is a hive of creative activity. Why do we do this strange ritual? The cups compress under the pressure of the water; the greater the pressure the smaller the cups become. The decorations also compress, so that you end up with miniature, highly-detailed cups when the CTD returns to the deck. We are due to work gradually back up the shelf slope to the shelf edge, lowering the CTD into 2,000, 1,500, 1,000 and 500 metres, so we could produce a series of cups scaled by the depth of the water. It’s fun, and also a great way of demonstrating the concept of water pressure to school kids.

Original post 

deep ctd

At the shelf edge, and rolling….

Ocean research cruise blog of Jonathan Sharples

 

November 14th. We are out at the edge of the continental shelf. Work had to stop early this morning as the waves reached 7 – 8 metres, making it too difficult to get our instruments over the side safely. We are now sat here trying to get a weather forecast, so that we can decide whether to stay out here and wait for the waves to settle down, or turn back onto the shelf and work in the shallow water.

Yesterday’s work started off very well. We managed to do 5 out of 6 sets of measurements as we headed southwest from the central Celtic Sea. We have collected a great set of information on the distribution of the autumnal nutrients out towards the shelf edge. Unfortunately we couldn’t collect any information on iron in the sea, as the instruments used to do that use a wire that has a lower breaking strain – we are fairly sure it wouldn’t survive the sudden snatches the wire gets when getting gear back onto the ship in these waves.

We’re rolling heavily now! The ship has turned direction slightly to try to get a signal to our back-up internet connection – then we can get a weather forecast and start to plan the next few days.

Original post 

13 November, 2014 21:38

Ocean research cruise blog of Jonathan Sharples

 

We finally finished our work at the mooring site yesterday evening. The marine snowcatcher work was not terribly successful. We are having difficulty in keeping them sealed, and also with the brass “messenger” that slides down the wire to trigger the catcher to shut. However, as usually happens, the Marine Facilities engineers on board have some ideas that might solve our problems so we’ll get another try in a couple of days.

We are heading southwest now, making a series of measurements with the CTDs across the continental shelf and to the shelf edge. There was some nasty weather during the night, with winds over 50 knots – dropped to 15 knots or so today, but it has left a decent swell for us to ride over on our way out. Over the next day the depth will increase slowly from 150 metres to 200 metres, then within about 2 hours the seabed will drop down to about 3000 m as we leave the continental shelf and head briefly into the open ocean. We will be doing a lot of iron chemistry out there, but I’ll explain more on what that is all about once we get started.

For now, work in the labs continues, on the samples we have collected since Monday and on those we collect during today. Invariably the lab work involved filtering lots of seawater, either because we want to analyse the pure seawater without any organisms in it (e.g. for dissolved nutrients), or because we want to filter out the organisms to study them more closely.

Original Post